Mô tả sản phẩm: Dao động ký 60MHz GDS-1062
| Vertical | |
| Channels | 2 |
| Bandwidth | DC ~ 60MHz (-3dB) |
| Rise Time | <5.8ns Approx. |
| Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) |
| Accuracy | ±(3% x |Readout|+0.1 div + 1mV) |
| Input Coupling | AC, DC & Ground |
| Input Impedance | 1M±2%, ~16pF |
| Polarity | Normal & Invert |
| Maximum Input | 300V (DC+AC peak), CATII |
| Waveform Signal Process | + , - , FFT |
| Offset Range | 2mV/div ~ 50mV/div : ±0.4V 100mV/div ~ 500mV/div : ±4V 1V/div ~ 5V/div : ±40V |
| Bandwidth Limit | 20MHz (-3dB) |
| Trigger | |
| Sources | CH1 , CH2 , Line , EXT |
| Modes | Auto, Normal, Single, TV, Edge, Pulse Width |
| Coupling | AC , DC , LF rej. , HF rej. , Noise rej. |
| Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV |
| Ext Trigger | |
| Range | ±15V |
| Sensitivity | DC ~ 30MHz : ~ 50mV 30M ~ 60MHz : ~100mV |
| Input Impedance | 1MΩ±2% , ~ 16pF |
| Maximum Input | 300V (DC AC peak) , CATII |
| Horizontal | |
| Range | 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div |
| Modes | Main, Window, Window Zoom, Roll, X-Y |
| Accuracy | ±0.01% |
| Pre-Trigger | 10 div maximum |
| Post-Trigger | 1000 div |
| X-Y Mode | |
| X-Axis Input | Channel 1 |
| Y-Axis Input | Channel 2 |
| Phase Shift | ±3° at 100kHz |
| Signal Aquisition | |
| Real-Time Sample Rate | 250MSa/s maximum |
| Equivalent Sample Rate | 25GSa/s maximum |
| Vertical Resolution | 8 Bits |
| Record Length | 4K Dots maximum |
| Acquisition Mode | Normal, Peak Detect, Average |
| Peak Detection | 10ns (500ns/div ~ 10s/div) |
| Average | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
| Cursors & Measurement | |
| Voltage Measurement | Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot |
| Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle |
| Cursors Measurement | Voltage difference between cursors (ΔV) |
| Time difference between cursors (ΔT) | |
| Auto Counter | Resolution : 6 digits Accuracy : ±2% Signal Source: All available trigger source except the Video trigger mode |
| Control Panel Function | |
| Autoset | Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level |
| Save Setup | Up to 15 sets of measurement conditions |
| Save Waveform | 15 sets of waveform |
| Display | |
| TFT LCD Type | 5.6 inch |
| Display Resolution | 234 (Vertically) x 320 (Horizontally) Dots |
| Display Graticule | 8 x 10 divisions |
| Display Brightness | Adjustable |
| Interface | |
| USB Slave Connector | USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) |
| SD Card Slot | Image (BMP), waveform data (CSV), and setup (SET) |
| Power Source | |
| Line Voltage Range | AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
| Miscellaneous | |
| Multi-Language Menu | Available |
| Online Help | Available |
| Accessories | User manual x 1 Power Cord x 1 GTP-060A-2 Probe(10:1/1:1) x 2 |
| Dimensions & Weight | 310(W) x 142(H) x 140(D)mm Approx. 2.5kg |
| Warranty | Limited Lifetime |
