Can To Fiber Bridge, Icp Das I-2533

Liên hệ

847 Huyen Ky, Phu Lam, Ha Dong, Ha Noi, Viet Nam


Kính gửi quý khách hàng

Công ty chúng tôi chuyên cung cấp các thiết bị và dịch vụ kĩ thuật, lắp đặt, Lĩnh vực tích hợp hệ thống tự động hóa SCADA/DCS, quan trắc công trình, v.v.

Chúng tôi xin giới thiệu tới quý khách  sản phẩm CAN to Fiber Bridge, ICP DAS I-2533.

CAN to Fiber Bridge helps to extend CAN networks distances over Fiber cable. Supports multiple Baud Rates and comes with utility tool.


Features

I-2533 is a local CAN bridge used to establish a connection between two CAN bus system via fiber optic transmission medium. In order to solve the problem between CAN and fiber transmission medium, I-2533 is specially designed for converting the electrical CAN bus signal to fiber optic cables. Not just like I-2532, I-2533 has three more important features.

First, the transmission distance limitation of the CAN bus system will not reduced because of CAN baud rate. It means that the total network distance can be extended. Second, the bus error on one CAN network will not affect the operation of another CAN network. Finally, the two CAN network can communication with each other by using different CAN baud rate for highly flexibility. Besides, I-2533 provides the utility tool for user-defined baud rate and filter configuration. By using this tool, it is allowed to have user-defined baud rate and message filter. When users use the I-2533 on two CAN network with different CAN baud rate, it may be useful to reduce the bus loading on the network which has low baud rate.


  • 82C250 CAN transceiver
  • 2500 Vrms isolation on the CAN side
  • 3 kv galvanic isolation between the power supply and CAN channel
  • Support both CAN 2.0A and CAN 2.0B
  • Fully compatible with the ISO 11898-2 standard
  • Rotary switch for CAN baud rate configuration
  • Build-in switch to select 120Ω terminal resistor
  • Up to 100 CAN nodes on each channel
  • Fiber Port: ST (Multi-mode)
  • Wave Length: 850 nm
  • Transmission distance up to 2 km at any CAN baud rate
  • Removable terminal block, Mount easily on DIN-rail
  • Allow user-defined baud rate
  • Utility tool for message filter configuration


  • Applications

    • Control System
    • Building Automation
    • Factory Automation
    • Distributed data acquisition

Specifications & Additional Information



CAN Interface

Connector

Screwed terminal block (CAN_GND, CAN_L, CAN_H)

Baud Rate (bps)

10 k ~ 1 M

Transmission Distance (m)

Depend on baud rate

Terminator Resistor

Switch for 120Ω terminator resistor

Isolation

2500 Vrms

Specification

ISO-11898-2, CAN 2.0A and CAN 2.0B

Fiber Interface

Connector

ST (Multi-mode)

Wave Length

850 nm

Fiber Cable

50 / 125 μm , 62.5 / 125 μm, 100 / 140 μm (62.5 / 125μm is recommended)

Propagation Delay

125ns max (125ns delay shortens bus line length by ~ 25 m)

Transmission Distance (m)

2 km max (in 62.5 / 125 μm fiber cable)

LED

Round LED

PWR LED, CAN_Tx LED, CAN_Rx LED, CAN_Err LED, FB_Err LED

Power

Power supply

Unregulated +10 ~ +30 VDC

Protection

Power reverse polarity protection, Over-voltage brown-out protection

Power Consumption

3 W

Mechanism

Installation

DIN-Rail

Dimensions

32.3mm x 77.5mm x 99.0mm (W x L x H)

Environment

Operating Temp.

-25 ~ 75 ℃

Storage Temp.

-40 ~ 80 ℃

Humidity

5 ~ 95% RH, non-condensing

 

Để biết thêm thông tin về sản phẩm cũng như dịch vụ lắp đặt, tích hợp hệ thống. Hãy liên hệ với chúng tôi hoặc truy cập vào website : www.mctt.com.vn

Rất mong được phục vụ quý khách.

Thanks and Best Regards!

_____________________

Nguyen Van Hung

Measurement and Control Equipment Co.,Ltd

847 Huyen Ky, Phu Lam, Ha Dong, Ha Noi, Viet Nam

Mobile: (+84) 904251826

Tel : (+84) 4 85894254

Yahoo: nvhung.mctt

Skype: nvhung.mctt

Email: nvhung@mctt.com.vn

Website: http://www.mctt.com.vn


Bình luận

HẾT HẠN

0904 251 826
Mã số : 9139516
Địa điểm : Hà Nội
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 21/12/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!