Nhà Cung Cấp, Đại Lý Của Servo Motor Mitsubishi-Dpc Việt Nam Cung Cấp

Liên hệ

436A/101 Đường 3/2 Phường 12 Quận 10


DPC Việt Nam là đại lí chính thức của Orientalmotor, Takex Sensor, Sanyodenki, showadenki…

Ngoài ra, DPC còn cung cấp giá tốt trên thị trường các thiết bị cuả: Omron, Mitsubishi, Keyence, KoYo, Fuji, DKM, Schneider, UPS…..

Để được tư vấn và hỗ trợ tốt nhất xin vui lòng liên hệ Ms Phương Trang :
1. Hand phone: 0903 539 518 /0912261879
2. EMail : phuongtrang@dpcvietnam.com 
3. Skypy :  PhuongTrang Nguyen 
4. Yahoo : dpcvietnam_phuongtrangnguyen
Rất mong có cơ hội hợp tác cùng Qúy khách hàng !!

Xin kính chúc quý khách hàng may mắn, thành công. 

Servo Standard Specifications








Servo Amplifier Model

MR-E-10A-KH003

MR-E-20A-KH003

MR-E-40A-KH003

MR-E-70A-KH003

MR-E-100A-KH003

MR-E-200A-KH003

MR-E-10AG-KH003

MR-E-20AG-KH003

MR-E-40AG-KH003

MR-E-70AG-KH003

MR-E-100AG-KH003

MR-E-200AG-KH003

Stocked Item

S

S

S

S

S

S

Power Supply

Voltage/Frequency (*1)

3-phase 200 to 230VAC 50/60Hz or 1-phase 230VAC 50/60Hz

3-phase 200 to 230VAC 50/60Hz

Permissible Voltage Fluctuation

For 3-phase 200 to 230VAC: 3-phase 170 to 253VAC 
For 1-phase 230VAC: 1-phase 207 to 253VAC

3-phase 170 to 253VAC

Permissible Frequency Fluctuation

±5% maximum

Control System

Sine-wave PWM control/current control system

Dynamic Brake

Built-in

Built-In Regenerative Resistor

None

Installed

Safety Features

Overcurrent shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal), encoder fault protection, 
regeneration fault protection, undervoltage/sudden power outage protection, overspeed protection, excess error protection

A Type Amps

Position Control Mode

Maximum Input Pulse Frequency

1Mpps (when using differential receiver), 200 kpps (when using open collector)

Positioning Feedback Pulse

Resolution per encoder/servomotor rotation: 131072 p/rev

Command Pulse Multiple

Electronic gear A/B multiple, A: 1 to 65535, B: 1 to 65535, 1/50 < A/B < 50

Positioning Complete Width Setting

0 to ±10000 pulses (command pulse unit)

Excess Error

±2.5 rotations

Torque Limit

Set by parameters

Speed Control Mode

Speed Control Range

Internal speed command 1:5000

Speed Fluctuation Rate

±0.01% maximum (load fluctuation 0 to 100%) 0% (power fluctuation ±10%)

Torque Limit

Set by parameters

AG Type Amps

Speed Control Mode

Speed Control Range

Analog speed command 1:2000, internal speed command 1:5000

Analog Speed Command Input

0 to ±10VDC / rated speed

Speed Fluctuation Rate

±0.01% maximum (load fluctuation 0 to 100%); 0% (power fluctuation ±10%) 
±0.2% maximum (ambient temperature 25°C±10°C [59°F to 95°F]), when using analog speed command

Torque Limit

Set by parameters or external analog input (0 to +10VDC/maximum torque)

Torque Control Mode

Analog Torque Command Input

0 to ±8VDC/maximum torque (input impedance 10 to 12kΩ)

Speed Limit

Set by parameters or external analog input (0 to ±10VDC/rated speed)

Structure

Self-cooling open (IP00)

Fan cooling open (IP00)

Environment

Ambient Temperature

0 to 55°C (32 to 131°F) (non-freezing), storage: -20 to 65°C (-4 to 149°F) (non-freezing)

Ambient Humidity

90% RH maximum (non-condensing), storage: 90% RH maximum (non-condensing)

Atmosphere

Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust

Elevation

1000m or less above sea level

Vibration

5.9m/s² maximum

Weight kg (lb)

0.7 (1.5)

0.7 (1.5)

1.1 (2.4)

1.7 (3.7)

1.7 (3.7)

2.0 (4.4)




Bình luận

HẾT HẠN

0903 539 518
Mã số : 10762484
Địa điểm : Hồ Chí Minh
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 16/10/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn